ES DUAL 2/1 RST 14.0

Multi-Post Lifting System two lifting units with T cover

VP 452012
Description

Description:

Multi-post system with two lifting units, one of which is movable with a narrow roller cover with pocket for an in-ground support cross-beam

  • Robust, hard chrome-plated lifting posts with high bending strength
  • Torsion protection due to double cylinders
  • Corrosion-resistant hydraulic piston, because it plunges into the hydraulic oil with every stroke
  • Medium-pressure hydraulic unit installed in a space-saving manner directly on the lifting units
  • Very quiet pump and very quiet electric motor in corrosion-resistant submerged oil version, with organic oil as an option
  • Optimum safety in operation owing to system with two separate hydraulic circuits and additional electronic pressure/leak detection as standard
  • Electronic synchronisation for even lifting of the vehicle (as per EN 1493), regardless of the height of the lifting point on the vehicle
  • High level of operating comfort on the central control and programming unit thanks to two operating panels incl. text display relating to the operation of the lifting units and the raising of the lifting columns
  • High level of flexibility in use due to different operating modes
  • Group and individual operating modes enable quick and easy replacement of wheel and axle suspensions.
  • Automatic positioning program for storing and calling back up different vehicle lifting positions to save time when adjusting the movable lifting units
  • Portable control unit for convenient operation with 20 metre control line
  • Simple, integrated, pneumatically operated emergency lowering in the event of power failure
  • Flexible and custom selectable post distance due to individual cassettes
  • Robust roller cover systems with travel drive made of aluminium profile segments with non-slip surface, connected with aluminium joints
  • Narrow roller cover with parking pocket for in-ground support cross-beam for fault-free driving on or for vehicles with a low bottom clearance, can be driven over with wheel loads of up to 4000 kg
    • With a high level of operating comfort due to support cross-beam’s automatic extension program from the parking pocket and automatic retraction program to the parking pocket
    • Time-saving movement program of the mounting beam suspended at a limited height above the floor guarantees safe procedures even in cases of poor visibility

Standard Delivery:

  • Two lifting units, one of which is movable, with T roller cover
  • Support cross-beam in anthracite grey (RAL 7016)
  • Vehicle support sliders are not included in the scope of delivery
  • Switch cabinet and portable operating panel
  • Pre-assembled cable harnesses per lifting unit, length: 30 m
  • Wiring and mounting materials
  • Installation cassette / installation frame not included in the scope of delivery
  • Lockable main switch
  • Operating manual and test log
  • EC CE declaration of conformity
documents
Brochure DE | EN | ES | FR
Technical datasheet DE | EN | ES | FR
Technical data
Load capacity CE 28000 kg
Load capacity per lifting cylinder 800 kg - 14000 kg
Lifting height max. 2050 mm
Raising / Lowering time (load-dependent) approx. 60 s / 60 s
Sliding post’s / fixed post’s installation depth 2523 mm/2723 mm
Movable lifting unit’s travel range 4020 mm
Support cross-beam’s width 1000 mm
Post diameter 2 x 125 mm
Roller cover traversable with wheel load 4000 kg
Roller cover width 630 mm
Roller cover material Aluminium
Operating pressure 70 bar
Motor power 9 kW
Fuse gG 25 A
Power supply 3/N/PE 400 V 50 Hz
Control unit (H x W x D) 800 mm x 800 mm x 300 mm
Hydraulic fluid quantity (not included in standard delivery) 130 l
images
films
http://www.mahaireland.ie/wp-content/themes/mahaireland/images/loading.gif