Two-Post Inground Lift, ZS VARIO 3.5 S

Two Post Inground Lift with swing arm support

VP 252117


Driving platform:

  • Driving platform length 4400 mm ideal for cars and small transporters
  • Ample freedom of movement in the working area below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle in particular
  • Flexible lift with maximum application range thanks to
    • Fast hoisting of the vehicle with the main platforms in the service consultation area or for chassis alignment checks
    • also for repair or for inspection work
    • wheel-free lifting by means of swing arm support standard up to 600 mm lifting distance or optionally with full extension up to 2000 mm
  • Optionally, can be upgraded to vehicle check-in lift with driving platform levelling for level driving
  • Optional conversion to chassis measurement lift with precisely aligned driving platforms, sliding plates for tension-free wheel support, driving platform levelling and axle measurement supports
  • Wheel-free lifting with swing arm support for lifting at the sill support points or frame support points
  • Accurate take-up of vehicles thanks to standard height-adjustable turning plates with thread and plug-in system
  • Support raisers and form-locking vehicle mounts for secure vehicle fixing in the product range
  • Swing arm support with continuously telescoping 3-part support arms for large and flexible support area
  • Automatic support-arm restraint can be reached particularly easily from above for manual readjustment of the support arms in raised set-up condition
  • Very low swivel arm mount with very low drive-over heights of 73 / 58 / 65 / 84 mm for vehicles with limited floor clearance
  • Optional driving platform and wheel-free jack prepared for level driving platforms with levelling plate sets
  • A high-quality powder-coated platform covering assists in corrosion protection and adds a significant upgrade in terms of appearance
  • Optional driving platform coating with granulate coating or Aluminium panelling
  • Pre-integrated compressed air connection and optional 230V/1PH energy supply in runways
  • Various assembly variants for optimum use with
    • driving platform resting on floor with low drive-on height and platform movement area with no tripping hazard edges
    • driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area
    • driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area with complete floor levelling of the platform movement area with no tripping hazard edges
  • Driving platform and floor levelling pre-equipped for use of an optional axle lift
  • Additional corrosion protection treatment in area of fold and cavity sealing
  • Optional no-dazzle rotatable LED lighting
  • Pinch point and shear point protection thanks to CE stop

Lift unit:

  • A corrosion-resistant, hard-chrome plated hydraulic piston ensures long-term stability since this is immersed in hydraulic oil with every lift, thus ensuring the application of a latent protective film.
  • Can be installed in all MAHA installation boxes up to 5500 kg
  • Simple, suspended installation of the lifting platform – offering the advantage of power transmission directly into the hall floor
  • Ultra-quiet hydraulic pump and electric motor, corrosion-resistant oil-submerged version, optionally available with organic oil
  • Electronic lift control with visual error display
  • Battery-operated emergency lowering
  • Optimisation of every aspect of workplace ergonomics thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system

Standard Delivery:

  • Driving platform 4400 mm powder-coated gentian blue (RAL 5010)
  • Wheel-free jack swing arm support (RS) with swing arm holder anthracite grey (RAL 7016), swing arm extensions galvanised
  • Support disc and support raiser 50 mm
  • Wheel nut tray, magnetic (2 pcs.)
  • Lift unit with integrated after-lift device
  • Ramps and drive-on plates
  • Rapid-action compressed-air coupling mounted on driving platform
  • Wiring and mounting material
  • Installation box/installation frame not included in delivery
  • Emergency DOWN cable for connection to switch box
  • Control unit with 4 x 10 m control cables (flexible oil cables)
  • Lockable master switch
  • Operating manual and test log
  • EC Declaration of Conformity CE
Brochure DE | EN | ES | FR
Technical datasheet DE | EN | ES | FR
Technical data
Load capacity CE 3500 kg
Load capacity CE with wheel-free jack 3200 kg
Lifting height max. 2000 mm
Full travel of wheel-free jack 600 mm
Post diameter 125 mm/90 mm
Raising / Lowering time (load-dependent) approx. 35 s / 35 s
Lifting/lowering time of wheel-free jack depending on load approx. 11 s / 11 s
Installation depth 2380 mm
Inner drive-through width 840 mm
Piston centers 1350 mm
Swing arm pivot point spacing 2500 mm
Swing arm extension 560 mm - 1020 mm
Disc adjustment range 75 mm - 106 mm
Disk adapter extenders 50 mm
Total width 2710 mm
Drive-through width 2262 mm
Operating pressure 28 bar
Motor power 3 kW
Fuse gG 16 A
Power supply 3/N/PE 400 V 400 Hz
Control unit (H x W x D) 400 mm x 280 mm x 120 mm
Dimensions total (L x W x H) 5471 mm x 2767 mm x 252 mm
Runway dimensions (L x W x H) 4400 mm x 617 mm x 126 mm
Hydraulic fluid quantity (not included in standard delivery) 108 l