Multi-Post Lifting System with three telescopic posts

VP 452083


Multi-post system with three lifting units, two of which are movable, and the fixed one in the middle cannot be adjusted

  • Plug & Play – complete delivery of the tested lifting system pre-assembled in the installation cassette
  • Telescopic lifting units with extremely high bending strength and torsion protection (as per EN 1493) due to our SQUARE posts
  • Stability due to anti-twist square posts with durable, slidable special nickel coating
  • Protected, internal safety double hydraulic cylinders
  • Anti-twist square post
  • Resistant, low-maintenance post guide
  • Optimum safety in operation owing to system with two separate hydraulic circuits and additional electronic pressure/leak detection as standard
  • Portable control unit with touchscreen for convenient use and display of all operationally relevant data and information
  • Electronic synchronisation for even lifting of the vehicle (as per EN 1493), regardless of the height of the lifting point on the vehicle
  • Signal lamp for safe raising / lowering of the vehicle
  • Battery-powered emergency lowering in the event of power failure
  • Extremely sturdy roller cover made of aluminium profile segments with non-slip surface. Aluminium profiles can be driven over, for wheel loads of up to 7.0 t
  • Flexible plug-in support system for very wide and very flat vehicle support
  • Crushing and shearing protection due to CE stop

Standard Delivery:

  • Three lifting units in the hot dip-galvanised installation cassette Installed ready for connection with roller cover
  • Portable operating panel with touchscreen
  • Support cross-beam in anthracite grey (RAL 7016)
  • 4 lifting brackets with a support width of 150 mm and a height of 40 mm
  • 2 lifting brackets with a support width of 150 mm and a height of 90 mm
  • 4 lifting brackets with a support width of 150 mm and a height of 150 mm
  • 4 100 mm extensions
  • Wheel positioning recess for positioning the vehicle
  • EMERGENCY OFF cable for connecting to the switch cabinet
  • Lockable main switch
  • Operating manual and test log
  • EC CE declaration of conformity
Brochure DE | EN | ES | FR
Technical datasheet DE | EN | ES | FR
Technical data
Load capacity CE 45000 kg
Load capacity per lifting cylinder 800 kg - 15000 kg
Lifting height max. 1890 mm
Raising / Lowering time (load-dependent) approx. 80 s / 80 s
Installation depth 1850 mm
Support cross-beam’s support range 550 mm - 1050 mm
Square post dimensions 290 mm / 260 mm
Roller cover traversable with wheel load 7000 kg
Roller cover width 930 mm
Roller cover material Aluminium
Operating pressure 175 bar
Motor power 17.5 kW
Fuse gG 50 A
Power supply 3/N/PE 400 V 50 Hz
Dimensions packaging (L x W x H) 14360 mm x 1100 mm x 1850 mm
Weight 7000 kg
Hydraulic fluid quantity (not included in standard delivery) 75 l